deCON - decontamination dryer for foodgrade flakes

deCON iV+

The established TRAY recycling solution.

Decontamination dryer for production of dry, iV increased, food grade flakes from bottles and trays, or skeleton waste directly in front of production extruder.

deCON iV+ benefits:

  • Decontamination of PCR flakes according to EFSA and FDA
  • iV increase dedicated for tray recycling
  • excellent dedusting
  • drying to below 50ppm
  • controlled and consistent residence time (FIFO)
  • Superior color values

DOWNLOAD PRODUCTSHEET

  1. stand alone
  2. in front of production extruder

     

  • Closing the loop in PET Thermoform Recycling 

    Intrinsic viscosity (iV) increase is a must for circularity. With deCON iV+ the iV loss during extrusion is recovered in every cycle.

  • Intrinsic viscosity (iV) increase is a must for circularity

    iV of post consumer tray material is considerably lower compared to bottles, with a difference of 10 to 12 points. For tray to tray recycling, it is required to keep the iV of sheet and the final thermoformed packaging above 0.6 dl/g.

technical data

 
Main Data 50 75
Max. output with flakes deCON mode1 [kg/h]* 1000-1200 1800-2000
Max. output with flakes iV+ mode2 [kg/h]*  500-700 800-1000
Net volume of reactor [m3] 4.9 6.9
Installed power [kVA]* 356 518
Energy consumption [kWh/kg]* 0.10-0.15 0.10-0.15
Max. surface moisture of input material [%] 1 1
Output humidity [ppm] <50 <50
Food grade according to EFSA, FDA EFSA, FDA
© 2016 viscotec · Imprint · Show on map
Starlinger Group